CST 16 Gauge Continuous Slope Top
Not less than 16 gauge cold rolled sheet steel, 18 degree pitch, in 72" lengths. A splice cover with concealed spring clip is to used to cover joints where Continuous Slope Tops are joined end-to-end. To be installed in addition to the locker flat top with end closures for support. Finish to match lockers.
CST 18 gauge Continuous Slope Top
Not less than 18 gauge cold rolled sheet steel, 18 degree pitch, in 72" lengths. A splice cover with concealed spring clip is to used to cover joints where Continuous Slope Tops are joined end-to-end. To be installed in addition to the locker flat top with end closures for support. Finish to match lockers.
KBE Boxed End Panel
Shall be "Boxed" type formed from 16 gauge cold rolled steel with 1" O.D. double bends on sides and a single bend at top and bottom with no exposed holes or bolts. If lockers have slope tops, end panels must be formed with slope at top to cover the ends of the slope tops. Finish to match lockers. Provide at all exposed ends.
KCFB Front Base (KD lockers only)
Base is fabricated of 16 gauge cold rolled sheet steel. Available in all powder coat finishes to match lockers.
KCSB Side Base (KD lockers only)
Side Base is fabricated of 16 gauge cold rolled sheet steel. Side bases are used at all exposed ends and are bolted to front and rear legs. Available in all powder coat finishes to match lockers.
KFSF Front Fillers
Provide where indicated, of not less than 16 gauge cold rolled sheet steel, factory fabricated to and finished to match lockers.
KFTF Top Filler
16 gauge cold rolled sheet steel, factory fabricated to and finished to match lockers.
KG Slip Joints
Provide where indicated, of not less than 16 gauge cold rolled sheet steel, factory fabricated and finished to match lockers.
KH 24ga. Additional Hat Shelf ( KD only)
24 ga. Additional Shelf must be installed using existing holes which are standard universal side panel to avoid field drilling.
KISTT 20 gauge Individual Slope Top (KD lockers only)
Not less than 20 gauge cold rolled sheet steel, 18 degree pitch, fabricated to be installed individually over each locker. Slope top is formed to include a full back. Individual Slope Tops are to be installed in addition to the locker flat top. End closures are to be provided at exposed ends. Finish to match lockers.
KMP Minimum Punched End Panel (KD lockers only)
18 gauge cold rolled steel and formed to fit tightly over the universal side panel at exposed row ends. Holes are provided at perimeter for fastening to locker. KMP - Minimum Punched End Panels are designed to cover all fasteners other than those at the perimeter of the panel. Finish to match lockers. Provide at all exposed ends.